Product Reviews

Silkland DP80 DisplayPort Cable Review: A Short, High-Bandwidth Link

A short DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby high-refresh monitor.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review is most relevant if your PC and monitor sit close together and you want a short cable built for high-bandwidth DisplayPort 2.1 connections.

Its standout appeal is the combination of VESA certification and support for demanding display modes, though the components at both ends still determine which modes you can use.

Silkland DP80 Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby high-refresh monitor.

  • VESA-certified DisplayPort 2.1 cable with bandwidth up to 80 Gbps and UHBR20 compatibility.
  • Uncompressed modes include 4K at up to 240 Hz, 8K at 60 Hz, and 2K at 540 Hz.
  • With DSC enabled, listed modes reach up to 16K at 60 Hz, 8K at 240 Hz, and 4K at 540 Hz, 480 Hz, or 360 Hz.
  • Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, HDCP 2.3, and 3D.

Pros

  • High bandwidth and ambitious refresh-rate support for compatible gaming displays.
  • VESA certification provides a useful standards-based qualification for buyers comparing DP 2.1 cables.

Consider before buying

  • At 1.6 feet, it is unsuitable for setups that need a longer route between computer and display.
  • The highest listed resolutions and refresh rates depend on DSC, while all modes depend on the capabilities of the source and display.
Read the full review summary

The Silkland DP80 is a 1.6-foot male-to-male DisplayPort cable with claimed bandwidth up to 80 Gbps and VESA certification.

It supports uncompressed 4K at up to 240 Hz, 8K at 60 Hz, and 2K at 540 Hz; higher listed modes, including 16K at 60 Hz and 4K at 540 Hz, rely on Display Stream Compression (DSC).

That makes it a feature-rich option for a compact desktop setup where a capable graphics card and monitor are already in place.

Its short length is the key practical constraint as well as a potential advantage: it can help keep a nearby PC-to-monitor connection tidy, but gives little room for routing or moving equipment.

The no-latch connector design, nylon exterior, and compatibility with older DisplayPort versions add flexibility to the physical setup. For a long run, a different length will be more suitable.

The buying factors

Silkland DP80 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth headroom

Up to 80 Gbps and UHBR20 support target high-bandwidth DisplayPort 2.1 setups.

9/10

High-refresh support

The listed uncompressed modes reach 4K at 240 Hz and 2K at 540 Hz, with higher DSC modes also specified.

5/10

Setup flexibility

The 1.6-foot length suits close components but limits routing distance.

8/10

Connector convenience

The no-latch design is intended for straightforward plugging and removal.

8/10

Build features

Tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior are practical construction details.

8/10

Compatibility range

It supports DP 2.1 and is backward compatible with DP 2.0 and DP 1.4.

Key Features and Specifications of Silkland DP80

  • VESA-certified DisplayPort 2.1 cable with bandwidth up to 80 Gbps and UHBR20 compatibility.
  • Uncompressed modes include 4K at up to 240 Hz, 8K at 60 Hz, and 2K at 540 Hz.
  • With DSC enabled, listed modes reach up to 16K at 60 Hz, 8K at 240 Hz, and 4K at 540 Hz, 480 Hz, or 360 Hz.
  • Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, HDCP 2.3, and 3D.
  • Male-to-male DisplayPort connectors, 1.6-foot length, and a no-latch design.
  • 28 AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
  • Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1, and 2.0 audio pass-through.

Pros and Cons of Silkland DP80

Pros

  • High bandwidth and ambitious refresh-rate support for compatible gaming displays.
  • VESA certification provides a useful standards-based qualification for buyers comparing DP 2.1 cables.
  • Compact length can reduce excess cable on a close PC and monitor arrangement.
  • No-latch connectors and a flexible nylon exterior offer convenient handling and routing.

Consider before buying

  • At 1.6 feet, it is unsuitable for setups that need a longer route between computer and display.
  • The highest listed resolutions and refresh rates depend on DSC, while all modes depend on the capabilities of the source and display.
  • Its advanced bandwidth may be unnecessary for a setup that does not use high-resolution or high-refresh DisplayPort modes.

Who Should Buy Silkland DP80?

Good fit

Consider the Silkland DP80 if your computer and monitor are close together and both have DisplayPort connections.

Its 80 Gbps capability and listed high-refresh modes give it a strong feature set for a gaming setup designed around DisplayPort 2.1.

Before buying, check your graphics card and monitor specifications for the exact resolution, refresh rate, and DisplayPort mode you want. The cable supports DSC-dependent modes, but the connected devices must also support the relevant features.

Confirm the 1.6-foot length will reach with your planned routing.

The backward compatibility with DP 2.0 and DP 1.4 may be helpful when connecting equipment from different generations.

The listed audio pass-through and gaming features add breadth, though they matter only when supported by the rest of your system.

Who should skip it

Choose another length if your computer is under a desk, positioned across a room, or needs extra cable slack for movement. A 1.6-foot cable is intended for a short connection.

Skip the DP80 if your equipment lacks DisplayPort ports, or if you are buying solely for a high refresh-rate mode without first checking that both the graphics card and monitor support it.

What the Silkland DP80 Means for a Gaming Setup

High bandwidth has to match the whole display chain

The DP80's up-to-80 Gbps bandwidth and UHBR20 compatibility make it suited to modern high-bandwidth DisplayPort connections.

Its listed uncompressed and DSC modes show the range it is designed to support, but they are not guarantees that every connected system can produce those settings.

Check the graphics card and monitor for matching DisplayPort version, resolution, refresh rate, and DSC support.

A short cable rewards careful placement

At 1.6 feet, the cable works best when the computer and monitor are positioned close to each other.

That can keep a compact setup from having much unused cable, while also leaving little margin to reroute the connection or move equipment.

Measure the path between ports, including any bends around a stand or case, before choosing this length.

Construction details help with everyday handling

The no-latch plugs are designed to connect without a release catch, which can be convenient where access is tight. The nylon exterior, tinned copper conductors, triple shielding, and gold-plated connectors describe a reinforced construction.

They are useful selection details, but do not replace checking fit, cable length, and supported display modes for your setup.

Gaming features depend on compatible devices

VRR, ALLM, FEC, DSC, and MST are included among the cable's supported features. They can be relevant to variable-refresh gaming or multi-monitor arrangements when the connected hardware and software support the same functions.

For a multi-screen setup, plan the connection type and monitor arrangement together rather than assuming the cable alone enables a particular configuration.

Alternatives to Silkland DP80

One useful alternative is included to show a longer cable option with a different bandwidth profile.

Computer DisplayPort Cables alternative

Silkland 54Gbps 16K DisplayPort Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps 16K DisplayPort Cable, 10 ft

Choose the DP80 for a nearby setup where its higher listed bandwidth and 2K 540 Hz mode suit your hardware.

Consider the 10-foot model when the route needs more length and its listed 54 Gbps modes meet your display requirements.

  • This 10-foot Silkland cable lists 54 Gbps bandwidth, support for 4K at up to 240 Hz and 8K at 120 Hz, and DSC support for 16K at 60 Hz.
  • It is backward compatible with DisplayPort versions 2.0 through 1.0.
  • The DP80 offers up to 80 Gbps bandwidth in a short 1.6-foot cable, with listed uncompressed support for 4K at up to 240 Hz and 2K at 540 Hz.

Is Silkland DP80 Worth It?

The Silkland DP80 is worth considering for a close-range gaming setup that uses DisplayPort and can benefit from its high bandwidth and high-refresh support.

Its VESA certification, backward compatibility, and detailed construction features round out a capable short cable.

Buy it only after confirming the cable reaches and your graphics card and monitor support the display mode you want, especially for DSC-dependent resolutions and refresh rates.

If your setup needs a longer run or does not use advanced DisplayPort modes, a different cable may fit better.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby high-refresh monitor.

  • VESA-certified DisplayPort 2.1 cable with bandwidth up to 80 Gbps and UHBR20 compatibility.
  • Uncompressed modes include 4K at up to 240 Hz, 8K at 60 Hz, and 2K at 540 Hz.
  • With DSC enabled, listed modes reach up to 16K at 60 Hz, 8K at 240 Hz, and 4K at 540 Hz, 480 Hz, or 360 Hz.
  • Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, HDCP 2.3, and 3D.

Written by

blackdown-hills.net Editorial Team

Editorial team

blackdown-hills.net publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby high-refresh monitor.

  • VESA-certified DisplayPort 2.1 cable with bandwidth up to 80 Gbps and UHBR20 compatibility.
  • Uncompressed modes include 4K at up to 240 Hz, 8K at 60 Hz, and 2K at 540 Hz.
Check Video Reviews on Amazon